ZipFirmwareZipFirmware
loginregister
ZipFirmware

Official Samsung Firmware Downloads

Explore, Download, and Update with Ease

Access thousands of region-specific Samsung firmware files. Fast, secure, and free downloads for all Samsung models and CSC regions.

Samsung Galaxy Tab S6 Lite (2020) (SM-P615) firmware iconSamsung Galaxy Tab S6 Lite (2020) (SM-P615)
SM-P615 product image

P615XXUAFZB1 Firmware for Samsung Galaxy Tab S6 Lite (2020) (SM-P615) — TGY

Firmware Information

PDA Version
P615XXUAFZB1
CSC Version
P615OLMAFZB1
CSC Code
Hong Kong flagTGY - Hong Kong
Size
4.8 GB
Build Date
2026-03-16
Downloads
0
Device Name
Samsung Galaxy Tab S6 Lite (2020)
Model Code
SM-P615
Brand
Samsung
CSC Region
TGY - Hong Kong
Firmware Package
Full files
Status
Active
Added On
2026-07-20
Updated On
2026-08-07
Total Downloads
0

Compatibility

This firmware is compatible with Samsung SM-P615. Check your model code, CSC, and device region before flashing.

Inside the ZIP File Breakdown

File TypeFile SizeDescriptionExtensionDownload
AP5.33 GBSystem, recovery, vendor, and main Android partitions..zipDownload
BL2.78 MBBootloader package required for device startup..zipDownload
CP25.71 MBModem and cellular radio firmware package..zipDownload
CSC172.78 MBRegional carrier settings and customization data..zipDownload

Verify your download

Compare this MD5 checksum against the file you downloaded to confirm it wasn't corrupted or tampered with in transit.

72d30e6aa48a4f831d38290044000b48

This is the free official stock ROM for the Samsung Galaxy Tab S6 Lite (2020) (SM-P615), specific to the TGY region. This firmware has the PDA version P615XXUAFZB1 and runs on Android 13 with a bootloader binary revision of Bit A. Download this flash file to safely update or repair your device.

Samsung Galaxy Tab S6 Lite (2020) Firmware Archive
Showing 0 to 0 of 0 entries

How to Flash Samsung Galaxy Tab S6 Lite (2020) Firmware with Odin

  1. 1

    Download & Extract Files

    Download the firmware ZIP and Odin tool from ZipFirmware. Extract both archives to a local folder — avoid paths with spaces or special characters.

  2. 2

    Boot into Download Mode

    Power off your Samsung device. Hold Vol Down + Power (or Vol Down + Bixby + Power on older models) until the warning screen appears, then press Vol Up to confirm.

  3. 3

    Connect via USB & Confirm COM Port

    Open Odin as Administrator on your PC and connect your device via USB. When the ID:COM box turns blue and shows "Added!", your device is recognized and ready to flash.

  4. 4

    Load Firmware Files into Odin Slots

    Click the BL, AP, CP, and CSC buttons in Odin and select the matching .tar.md5 files from your extracted firmware folder. Never mix files from different firmware versions.

  5. 5

    Flash & Verify Success

    Click Start. Odin flashes each partition in sequence. When the bar turns green and shows "PASS!", the flash is complete. Your device reboots automatically — do not disconnect USB until finished.