ZipFirmwareZipFirmware
loginregister
ZipFirmware

Official Samsung Firmware Downloads

Explore, Download, and Update with Ease

Access thousands of region-specific Samsung firmware files. Fast, secure, and free downloads for all Samsung models and CSC regions.

Samsung Gear 2 (SM-R380) firmware iconSamsung Gear 2 (SM-R380)
SM-R380 product image

R380XXU0BNL2 Firmware for Samsung Gear 2 (SM-R380) — NZC

Firmware Information

PDA Version
R380XXU0BNL2
CSC Version
R380OXA0BNL2
CSC Code
New Zealand flagNZC - New Zealand
Size
225 MB
Build Date
2015-09-04
Downloads
0
Device Name
Samsung Gear 2
Model Code
SM-R380
Brand
Samsung
CSC Region
NZC - New Zealand
Firmware Package
Full files
Status
Active
Added On
2026-07-22
Updated On
2026-08-19
Total Downloads
0

Compatibility

This firmware is compatible with Samsung SM-R380. Check your model code, CSC, and device region before flashing.

Inside the ZIP File Breakdown

File TypeFile SizeDescriptionExtensionDownload
AP586.72 MBSystem, recovery, vendor, and main Android partitions..zipDownload
BL19.22 MBBootloader package required for device startup..zipDownload
CPNot availableModem and cellular radio firmware package..tar.md5Download
CSC42.97 MBRegional carrier settings and customization data..zipDownload

Verify your download

Compare this MD5 checksum against the file you downloaded to confirm it wasn't corrupted or tampered with in transit.

c0f06a406528657745ad4bf568befb9b

This is the free official stock ROM for the Samsung Gear 2 (SM-R380), specific to the NZC region. This firmware has the PDA version R380XXU0BNL2 and runs on Android N/A with a bootloader binary revision of Bit 0. Download this flash file to safely update or repair your device.

Samsung Gear 2 Firmware Archive
Showing 0 to 0 of 0 entries

How to Flash Samsung Gear 2 Firmware with Odin

  1. 1

    Download & Extract Files

    Download the firmware ZIP and Odin tool from ZipFirmware. Extract both archives to a local folder — avoid paths with spaces or special characters.

  2. 2

    Boot into Download Mode

    Power off your Samsung device. Hold Vol Down + Power (or Vol Down + Bixby + Power on older models) until the warning screen appears, then press Vol Up to confirm.

  3. 3

    Connect via USB & Confirm COM Port

    Open Odin as Administrator on your PC and connect your device via USB. When the ID:COM box turns blue and shows "Added!", your device is recognized and ready to flash.

  4. 4

    Load Firmware Files into Odin Slots

    Click the BL, AP, CP, and CSC buttons in Odin and select the matching .tar.md5 files from your extracted firmware folder. Never mix files from different firmware versions.

  5. 5

    Flash & Verify Success

    Click Start. Odin flashes each partition in sequence. When the bar turns green and shows "PASS!", the flash is complete. Your device reboots automatically — do not disconnect USB until finished.